• Skirting Trunking
• Dado Trunking
• Bench Trunking

TF62/2C 150mm x 50mm	TF82/3C 200mm x 50mm
(2 compartment) top 50mm, bottom 100mm	(3 compartment) top 50mm, centre 100mm, bottom 50mm
TC62/2C 150mm x 50mm	TC82/3C 200mm x 50mm
(2 compartment) top 50mm, bottom 100mm	(3 compartment) top 50mm, centre 100mm, bottom 50mm

Accessories

ISB Internal Bend	ESB External Bend	FSB/D Flat Bend (downward)	FSB/U Flat Bend (upward)
FST/LH-U Flat tee left hand (upward)	FST/RH-U Flat tee right hand (upward)	IST/LH Internal tee left hand	IST/RH Internal tee right hand
FST/D Flat tee (downward)	EST/LH External tee left hand	EST/RH External tee right hand	STRAP Additional cover strap
TSO Twin socket lid	SSO Single socket lid	EC/LH End cap left hand	EC/RH End cap right hand
SS/SB Back Box

Skirting Trunking

Flytec skirting trunking is supplied in 2 metre lengths, comprising a galvanised sheet steel body with powder coated overlapping lid, white as standard. A cover strap is provided with each length of lid. This reduces the necessity for special on-site cutting requirements, the strap covering any cut edges.

• 20mm knockouts are provided in the partition at 250mm centres. This allows easy positioning of outlet plates, which require screening via the steel back box that fixes to the partition.
• Chamfered or flat top options as standard
• Other powder coated finishes are available even when only a short run of trunking is required
• 2 or 3 compartments are most commonly used. However systems to suit client's individual requirements can be manufactured within the same short lead times.

How to order

• Accessory part numbers are the same for all styles of skirting and dado. It is the trunking part number pre-fixed before the accessory that ensures you get the correct item.
• Example: A twin socket outlet lid for 200mm x 50mm, 3 compartment flat top skirting. Take trunking reference TF82/3C + accessory part number TSO to give TF82/3C TSO

Factory manufactured sets

• Pier sets and off sets can be pre made minimising labour costs. A member of our technical staff could advise and assist for all on-site measurements
• Should you require factory made sets without the need of a site visit by our technical staff, dimensions of wall as shown here will be required.